The Epiphone Scroll Guitar

Possibly the most unique guitar ever made under the Epiphone brand is the Epiphone SC Scroll. It was produced in Japan at the Matsumoku factory from 1976 through 1979 and is named for the carved scroll on the upper bout of the guitar.

Note the German Carve

The Scroll body also features a unique German Carve around the edges of each model. Other features of the Scroll model were ebony or ebonized necks, coil-tap and optional Leo Quann Badass-style bridge as well as optional open-coil Scroll pickups by Gibson.

SC-350

The SC-350 featured a Mahogany body with the German carve surrounding the mahogany finished top. The bolt-on neck was bound with white trim. The fret board was made of rosewood and featured dot inlays. The guitar was equipped with twin humbucking pickups controlled by a single volume and tone control and a 3 way switch. The strings went over a tune-o-matic style bridge and attached to a stop tail piece. All hardware was finished in chrome. The nut was made of plastic. The three-on-a side tuning gears were covered die cast versions.

SC-450

The SC-450 came with a Maple body that featured the German carve. It was offered with either a Mahogany or Natural finish. The neck was made of Maple and was set in to the body. It was topped with a rosewood fret board that came with dot inlays. It had twin humbucking pickups that were controlled by a single volume and tone control, a three-way selector switch and a split-coil switch. This guitar came with either a tune-o-matic style bridge or a Leo Quan Badass style bridge. The tune-o-matic versions featured a stop tailpiece. . All hardware was chrome finished and the nut was made of bone or plastic. The three-on-a-side tuners were sealed die cast models.

SC-550

The SC-550 also featured the German carve on its Maple body. Like the 450 version, the neck on this guitar was set-in and made of Maple. The neck was topped with an Ebony fretboard with block inlays.

SC-550 Natural

It featured twin humbucking pickups on the body controlled by a single volume and tone control, a three-way selector switch and a split-coil mini-toggle switch.

This guitar came with a tune-o-matic style bridge and a stop tailpiece. The nut was made of bone and all hardware was finished in gold plating. The three-on-a-side tuners were sealed die cast models. The body came in either and Ebony or Natural finish.